Table 1-6 Isdn (Backup, User Circuit - Zhone 100 User Manual

Appendix
ISDN
(Backup, User
Ckt)
Display
ISDN Adapt Fault
Primary On Line
Secondary On Line
Primary Dwn Spd
Secondary Dwn Spd
Connecting
Failed
ISDN Line Failure
ISDN SPID Failure
B1 SPID Failure
Service Disabled
Time Disabled
Loop Up
Armed
A-6
ISDN shows the highest priority ISDN Backup related fault, test or status currently de-
tected. This is displayed on the System View, Frame Manager Statistics Summary and
ISDN Status / Test screens.

Table 1-6 ISDN (Backup, User Circuit)

The ISDN hardware has failed (backup cannot be accomplished)
Backup connection in place using Primary Dials.
Backup connection in place using Secondary Dials.
Backup connection in place using Primary Dials, but with fewer ISDN connections
than configured for.
Backup connection in place using Secondary Dials, but with fewer ISDN connections
than configured for.
Connection is being established.
Retry attempts exhausted.
The ISDN line of at least one B-Channel is faulty (backup may not be possible).
An invalid or incorrect SPID has been entered for at least one B-Channel (backup may
not be possible).
A B2-Channel cannot operate due to a SPID failure on its associated B1-Channel.
"Service Disable" has been selected on the "ISDN Status / Test" screen.
"Time Disable" has been selected on the "ISDN Status / Test" screen.
LoopUp connection in place on any assigned B-Channel.
Default state if not disabled and no failure exists.
NetPath 100 User's Manual - Installation Guide
Description
980-001-0210G
June 1999