Backup / On-Demand Configuration; Figure 6-6 Backup / On-Demand Configuration Screen - Zhone 100 User Manual

6 Options
Backup / On-
Demand
Configuration

*********************** Backup / On-Demand Configuration ***********************

Name: F@43802
Bkp#1 WAN IP Add [I1=]: 0.0.0.0
Bkp#2 WAN IP Add [I2=]: 0.0.0.0
Bkp Activate Delay [A=#]: 1
0 thru 240 mins
Bkp Rtry Count [C1=#]: 1
1 thru 4
Bkp Rtry Holdoff [H1=#]: 2
1 thru 15 minutes
Assign to Backup [B=]/Demand [D=]
-Channel- -Assign-
>>1) Line1
>>2)
>>3) Line2
>>4)
>>5) Line3
>>6)
7) Line4
8)
Help[?]
>
6-12
The Backup / On-Demand Configuration screen allows the user to view and alter pa-
rameters for the ISDN Backup or On-Demand operations.
To proceed to Backup/On-Demand Configuration, from the System View Screen, type
"BC" and press ENTER.
The Backup / On-Demand Configuration screen is shown in Figure 6-6.
Learn IP Add [L=]
>>1) Each Connect<<
2) When Zero
----- Primary Dial #1 ---- ---- Secondary Dial #2 ---
B1 Backup<< [P1=]:
B2 Backup<< [P2=]:
B1 Backup<< [P3=]:
B2 Backup<< [P4=]:
B1 Demand<< [P5=]:
B2 Demand<< [P6=]:
B1 [P7=]:
B2 [P8=]:
Save[SA] Cancel[X]

Figure 6-6 Backup / ON-Demand Configuration Screen

Backup: Establishes an ISDN data link and switches the Base module Frame Manager
from the T1 link onto the ISDN link(s). Backup is triggered by a T1 outage, loss of
Network or may be operator-initiated. Configuration items are:
Bkp # n WAN IP Add - Sets the IP Address for management access while the
unit is on backup. Bkp # 1 WAN IP Add is used for Primary Dial # 1, and Bkp #
2 WAN IP Add is used for Secondary Dial # 2.
Bkp Activate Delay - Sets the time to wait after a T1 outage or loss of Network
is detected, before a backup attempt is initiated. Valid range is from 0 to 240 min-
utes.
NOTE: If the original initiating condition clears for a duration of at least one
minute and the Bkp Activate Delay has not yet expired, the backup will be
aborted.
Bkp Rtry Count - Sets the number of retry attempts to establish a backup connec-
tion on each set of phone #'s (Primary then Secondary). Valid range is from 1 to 4.
Bkp Rtry Holdoff - Defines the delay between each retry attempt. Valid range is
from 1 to 15 minutes.
NetPath 100 User's Manual - Installation Guide
Dmd Rtry Count [C2=#]: 1
1 thru 4
Dmd Rtry Holdoff [H2=#]: 2
1 thru 15 minutes
([B=m,n,..r] and/or [B=m-n] for multiples)
[S1=]:
[S2=]:
[S3=]:
[S4=]:
[S5=]:
[S6=]:
[S7=]:
[S8=]:
980-001-0210G
June 1999