Zhone 100 User Manual page 105

980-001-0210G
June 1999
DLCI [D=#,All,or Sum] - selects the PVC(s) for which the historical statistics will
be produced. Choices are:
Specific PVC or "Etc"- Enter DLCI number for the desired PVC (or "Etc"). Pro-
vides a display of the activity for the selected DLCI beginning with the se-
lected interval. If an interval contains no activity, a single line with DLCI
number and all other values = "0" is displayed.
All PVCs - Enter All (or only "A"). Displays a listing by intervals providing an in-
dividual line of statistics for each DLCI found within that interval. Within
the interval, the DLCIs are listed in numerical DLCI order, with the interval
number (count) placed only on the first line of statistics for that DLCI. If an
interval contains no activity, a single line with DLCI = "Etc" and all other
counts = "0" is displayed.
Sum - Enter Sum (or only "S"). Provides one line of statistics for each interval, con-
taining the sum of all PVC counts within the interval. The Average and
Maximum time measurement values are set to "0" (zero). The DLCI value
is displayed as "Sum."
Additional commands on this screen are:
Next Page [+] - Advances to the next page of historical statistics until all intervals (up
to 96) have been displayed.
NetPath 100 User's Manual - Installation Guide
5 Diagnostics
5-21