Active Test; Table A-1 Active Test - Zhone 100 User Manual

Appendix

Active Test

Display
Lp to User
User Lp to Netw
User 2047 to Netw
User Zero to Netw
2047 to User
Line Lp to Netw
Payld Lp to Netw
QRSS to Netw
Alt Ones to Netw
2047 to Netw
Zero to Netw
Line Lp to CPE
Line Lp to DSX
Payld Lp to DSX
QRSS to DSX
DSX 2047 to Netw
DSX Zero to Netw
2047 to DSX
Lp to Drop
Drop Lp to Netw
Drop 2047 to Netw
A-2
Active Test shows the highest priority test currently running. This is displayed on the
System View, CSU / DSX Statistics Summary, Frame Manager Statistics Summary
and ISDN Status / Test screens.

Table A-1 Active Test

Loopback is in place at the User Port toward the User Circuit.
Loopback is in place at the User Port toward the Network Circuit.
2047 pattern BERT is being sent toward the Network Circuit (for DS0s assigned to
User Port).
All Zeros pattern BERT is being sent toward the Network Circuit (for DS0s assigned to
User Port).
2047 pattern BERT is being sent toward the User Circuit.
Full T1 Line loopback in place at Network Port toward Network Circuit.
Full T1 Payload loopback in place toward Network Circuit.
QRSS pattern BERT is being sent toward the Network Circuit.
Alternating Ones pattern BERT is being sent toward the Network Circuit.
2047 pattern BERT is being sent toward the Network Circuit.
All Zeros pattern BERT is being sent toward the Network Circuit.
Full T1 Line Loopback applied within the unit's framer toward the CPE port(s):
User Port (also DSX Port and Drop Port if DSX/Drop Adapter installed.)
Full T1 Line Loopback in place toward the DSX Circuit.
Full T1 Payload loopback in place toward the DSX Circuit.
Full T1 QRSS pattern BERT is being sent toward the DSX Circuit.
2047 pattern BERT is being sent toward the Network Circuit (for DS0s assigned to
DSX Port @ Nx56K.)
All Zeros pattern BERT is being sent toward the Network Circuit (for DS0s assigned to
DSX Port @ Nx56K.)
2047 pattern BERT is being sent toward the DSX Circuit (for DS0s assigned to DSX
Port @ Nx56K.)
Loopback is in place at the Drop Port toward the Drop Circuit.
Loopback is in place at the Drop Port toward the Network Circuit.
2047 pattern BERT is being sent toward the Network Circuit (for DS0s assigned to
Drop Port).
NetPath 100 User's Manual - Installation Guide
Description
980-001-0210G
June 1999