Zhone 100 User Manual page 18

Zhone netpath 100 network-accessory: install guide
Table of Contents

Advertisement

1 Preface
1-6
Rev. 5.01.xx from Rev. 4.01.xx
Added - Loop to User operator command, for ISDN Data port.
Added - Call Out / Loop Test to ISDN Demand Tests.
Added - Separate traps for PVC Availability and Unavailability.
Added - Current CIR rate per PVC to PVC Statistics Screen display.
Added - ML-PPP option for ISDN BOD bundling (2 B-Channels.)
Added - Display of Cause Codes for ISDN connection failure.
Download Notes
Downloading Revision 5.01.xx software to a NetPath 100 unit currently running with
a prior version may result in some configuration changes which will have to be re-
stored (via remote management accessed reconfiguration). Specific configuration
items affected are:
Delay monitoring for all PVCs will be turned OFF if previously configured for
Delay monitoring.
Protocol Monitoring selections may be mis-mapped (different protocols
selected) if previously configured for Protocol monitoring.
Rev. 4.01.xx from Rev. 3.01.xx
Added - Tunneled option for WAN management PVC, including configuration
by DLCI DIP Switches.
Added - Message Segmentation support for management traffic and
configurable maximum message size (MTU).
Added - Asynchronous LMI support.
Download Notes
Downloading Revision 4.01.xx software to a NetPath 100 unit currently running with
a prior version may result in some configuration changes which will have to be re-
stored (via remote management accessed reconfiguration). Specific configuration
items affected are:
Delay monitoring for all PVCs will be turned OFF if previously configured for
Delay monitoring.
Protocol Monitoring selections may be mis-mapped (different protocols
selected) if previously configured for Protocol monitoring.
NetPath 100 User's Manual - Installation Guide
980-001-0210G
June 1999

Advertisement

Table of Contents
loading

Table of Contents