Zhone 100 User Manual page 139

atdt(dial number)w,,,4
CONNECT 9600/ARQ
NetPath 100 - FSU/ISDN Version 01.29 - May 25 1999 - 18:50:45
(C) Copyright Control Resources Corporation, 1997-1999.
All Rights Reserved
Login for PPP TRACE messages
Type HELP for available commands
Type EXIT to end the session
OCP-ISDN>
OCP-ISDN>TRACE PPPTRACE
PPP Trace Messages Enabled
OCP-ISDN>DIAG
Entering Diagnostic Mode - Press Esc to go back to OCP Mode
OCP-ISDN>
980-001-0210G
June 1999
The following is an example of a trace initiation and some of the diagnostic messages
displayed during the establishment of a one B-Channel MP-PPP connection.
Establish dial-in connection.
Enter any character followed by ENTER.
Activate trace by entering "TRACE PPPTRACE" followed by ENTER.
Start Diagnostic Mode by entering "DIAG" followed by ENTER.
NetPath 100 User's Manual - Installation Guide
6 Options
6-23