Isdn Status /Test; Figure 6-8 Isdn Status / Test Screen - Zhone 100 User Manual

ISDN Status /Test

****************************** ISDN Status / Test ******************************
Name: F@43802
CSU Fault:
Test Status:
Netw:0.0.0.0
----- Line 1 ----
B1: Ready-000
B2: Ready-000
Help[?]
>
980-001-0210G
June 1999
The ISDN Status / Test screen provides ISDN Adapter status and test capability.
The ISDN Status / Test screen is accessed from the System View screen, selecting [IT]
by typing "IT" followed by ENTER.
The ISDN Status / Test screen is shown in Figure 6-8.
Backup Setup [B=]
1) Reset/Arm
2) Activate
3) Service Disable
4) Time Disable
Duration: hh:mm:ss
Demand Setup [D=]
1) Reset/Arm
2) Call Out/Loop
3) Loop to User
User:0.0.0.0
----- Line 2 ----
Ready-000
Ready-000
Close[X] AutoUpdate[AU]

Figure 6-8 ISDN Status / Test Screen

CSU Fault - Displays current status being detected by CSU.
States (in highest priority order) are: CSU Fault, CFA/Red Alarm, Remote/Yel-
low Alarm, AIS/Blue Alarm, CSU Threshold Alarm or (blank) if no failures or er-
rors detected.
Refer to Device Status / Test screen description in section 5 Diagnostics of this
manual for detailed descriptions of these faults.
Frame Mgr Fault - Displays current alarm condition detected by unit's
Frame Manager. States (in highest priority order) are:
LMI Network Failure, LMI User Failure, Netw Threshold Alarm,
User Threshold Alarm, PVC Drpd Mon Alarm, PVC Dlvd Pkt Alarm,
PVC Delay Alarm, BECN/FECN Alarm, or (blank) if none.
Refer to Device Status / Test screen description in section 5 Diagnostics of this
manual for detailed descriptions of these faults.
NetPath 100 User's Manual - Installation Guide
Frame Mgr Fault:
High Speed Interface Status
DTR: On
RTS: On
Power: On
ISDN Backup: Ready
On-Demand Interface Status
DTR: Off
RTS: On
ISDN Demand: Ready
/Name /Password
----- Line 3 ---- ----- Line 4 ----
Ready-000-ML
Ready-000-ML
6 Options
6-17