Table 1-7 Isdn (On-Demand Port - Zhone 100 User Manual

ISDN
(On-Dmd Port)
Display
ISDN Adapt Fault
Connecting
Failed
Loop to User
Online Call/Lp
Primary On Line
Secondary On Line
Primary Dwn Spd
Secondary Dwn Spd
Connecting
Failed
ISDN Line Failure
ISDN SPID Failure
B1 SPID Failure
Armed
980-001-0210G
June 1999
ISDN shows the highest priority ISDN On-Demand related fault, test or status current-
ly detected. This is displayed on the System View screen.

Table 1-7 ISDN (On-Demand Port)

The ISDN hardware has failed (call cannot be accomplished)
On-Demand connection in place using Primary Dials.
On-Demand connection in place using Secondary Dials.
On-Demand connection in place using Primary Dials, but with fewer ISDN
connections than configured for.
On-Demand connection in place using Secondary Dials, but with fewer ISDN
connections than configured for.
Connection is being established.
Retry attempts exhausted.
The ISDN line of at least one B-Channel is faulty (call may not be possible).
An invalid or incorrect SPID has been entered for at least one B-Channel (call may not
be possible).
A B2-Channel cannot operate due to a SPID failure on its associated B1-Channel.
"Service Disable" has been selected on the "ISDN Status / Test" screen.
"Time Disable" has been selected on the "ISDN Status / Test" screen.
LoopUp connection in place on any assigned B-Channel.
Default state if not disabled and no failure exists.
The ISDN hardware has failed (call cannot be accomplished)
NetPath 100 User's Manual - Installation Guide
Description
Appendix
A-7