Table of Contents
Advertisement
4 Operation
Device
Configuration
***************************** Device Configuration *****************************
Name [N=]: F@43802
Location [L=]: Fair Lawn, N.J.
Contact [C=]: J. Jones
WAN IP Add [I=]: 0.0.0.0
------ Modem Setup / Model: RC144DPi Rev CA V1.610-CS29F ------
Dial String [D=]:
Answer Call [AC=]:
Aux1 Setup [A1=]: A96N8AT&K0Q1^MATA
Aux2 Setup [A2=]: A96N8AT&K0Q1^MATA
(NOTE: Text & IP entries may not be made in combination with other parameters!)
ModemLine [M=]
>>1) Test<<
2) No Test
P/C Encap [U=]
>>1) Raw<<
2) IETF
Help[?]
>
4-12
The Device Configuration screen allows you to view and alter parameters for System
and Modem operations.
The Device Configuration screen is shown in Figure 4-7.
RtryCount[R=#]:2
1 thru 4
WAN Encap [T=]
>>1) Learning<<
2) Raw
3) IETF
---- CHAP Name/Key ---
4) SNAP
[CN=]:CHAPNAME********
Save[SA]
Cancel[X]
[CK=]:****************
Figure 4-7 Device Configuration Screen
All NetPath 100 screen entries and selections are made by entering the two or three
characters shown in brackets next to the field titles, equals "=", then entering the value
or string followed by ENTER.
Example: To enter "ABC" in the Name field,
Type: N=ABC and press ENTER
Current selections are highlighted by bracketing with, ">>"....."<<" characters.
Device Configuration
1. Enter Name and Location of this NetPath 100 installation (optional but
recommended).
2. Enter Contact Name and Phone Number of local technical contact (optional).
3. Enter WAN IP Address for SNMP management of the NetPath 100. If set to the
default value as shown in Figure 4-7, the IP Address will be learned automatically.
The first valid IP Address will be "learned". Once a value is entered or learned
automatically, it will replace the "0.0.0.0" value and auto learning will be
discontinued.
4. Enter Payload or CPE (private user) IP Address for PVC management of the
NetPath 100.
NetPath 100 User's Manual - Installation Guide
Payload/CPE IP Add [J=]: 0.0.0.0
RtryHoldoff[H=#]:30
InactivityLogout[O=#]:15
1 thru 60 seconds
MTUSize[W=#]:1492
View Pswrd [P=]:11111111
88 thru 4000 Octs
Test Pswrd [E=]:22222222
Config Pswrd [F=]:33333333
Super Pswrd [S=]:********
Super Verify [V=]:********
System Pswrd [Y=]:DISABLED
Frm Mgr [Z=]
>>1) FrRelay<<
2) ClrChan
1 thru 30 minutes
980-001-0210G
June 1999
Advertisement
Table of Contents
Troubleshooting
