Isdn Adapter Configuration; Figure 6-5 Isdn Adapter Configuration Screen - Zhone 100 User Manual

6 Options
ISDN Adapter
Configuration

************************** ISDN Adapter Configuration **************************

Name: F@43802
Bkp: Rate [R1=]
>>1) Nx56k<<
2) Nx64k
Dmd: Rate [R2=]
>>1) Nx56k<<
2) Nx64k
-Channel-
Line1
Line2
Line3
Line4
Help[?]
>
6-10
The ISDN Adapter Configuration screen allows you to view and alter parameters for
the ISDN Adapter related operations.
To proceed to ISDN Adapter Configuration, from the System View Screen, type "IC"
and press ENTER.
The ISDN Adapter Configuration screen is shown in Figure 6-5.
IMUX [M1=]
>>1) Bond/M1<<
IMUX [M2=]
>>1) Bond/M1<<
2) ML PPP
----------- SPID ----------
B1 [P1=]:
B2 [P2=]:
B1 [P3=]:
B2 [P4=]:
B1 [P5=]:
B2 [P6=]:
B1 [P7=]:
B2 [P8=]:
Save[SA] Cancel[X]

Figure 6-5 ISDN Adapter Configuration Screen

ISDN S/W: Software revision number currently operating the ISDN Adapter module.
Switch Type - Selects the Protocol to match the ISDN Switch being used by the Telco
providing the ISDN service.
Bkp: Parameters to be selected for Backup operation.
Rate - Select the data rate to be used when establishing Backup ISDN
connections.
IMUX - Select the method of inverse multiplexing to be used for Backup calls.
Bond/M1 - Selects Bonding Mode 1 Protocol to bond up to eight B-
Channels.
Dwnspd - "Disable" will not allow a multi-B Channel backup connection to be
completed if only a portion of the B Channels succeed.
Default is "Enable" (downspeeding allowed).
NetPath 100 User's Manual - Installation Guide
Switch Type [S=]
Dwnspd [D1=] >>1) National/NI-1<<
>>1) Enable<<
2) Disable
Dwnspd [D2=] TxD Clk [T=]
>>1) Enable<< >>1) DCE<<
2) Disable 2) DTE
------- Directory # -------
[N1=]:
[N2=]:
[N3=]:
[N4=]:
[N5=]:
[N6=]:
[N7=]:
[N8=]:
ISDN S/W: 01.29
2) 5ESS-PtoP/NonInit
3) 5ESS-MultiP/Init
4) DMS100
Control [C=]
>>1) DTR<<
2) V.25
980-001-0210G
June 1999