Mounting Optional; Table - Zhone 100 User Manual

3 Installation
Mounting
Optional
Model 467
Power Control
Unit
3-2
The external Power Control Unit may be wall-mounted using the four mounting holes
provided on its base (refer to Figure 2-6).
NOTE: Use wall fasteners appropriate for the wall's surface material, i.e. wood
screws for wooden surfaces, expansion fasteners for gypsum wall board, etc.
The Power Control Unit may also be placed or mounted on a table-top, shelf, or floor
near the NetPath 100.
The Power Control Unit must not be placed where the unit or its
cables may be bumped, kicked or walked on.
NetPath 100 User's Manual - Installation Guide
CAUTION
980-001-0210G
June 1999