AT commands
Parameter range
A string of case-sensitive ASCII printable characters from 0 to 20 bytes in length. A carriage return
or a comma automatically ends the command.
Default
0x20 (an ASCII space character)
SE command
Sets or displays the application layer source endpoint value. The value is used as the source endpoint
for all data transmissions. SE is only used in Transparent mode. The default value (0xE8) is the Digi
data endpoint.
Sets or displays the application layer source endpoint value used for data transmissions.
This command only affects outgoing transmissions in transparent mode (AP=0).
0xE8 is the Digi data endpoint used for outgoing data transmissions.
0xE6 is the Digi device object endpoint used for configuration and commands.
Parameter range
0 - 0xFF
Default
0xE8
DE command
Sets or displays the application layer destination ID value. The value is used as the destination
endpoint for all data transmissions. The default value (0xE8) is the Digi data endpoint.
Parameter range
0 - 0xFF
Default
0xE8
CI (Cluster ID)
Sets or displays the application layer ID value. Use this value as the cluster ID for all data
transmissions. CI is only used in Transparent mode.
Parameter range
0 - 0xFFFF
Default
0x11 (Transparent data cluster ID)
TO (Transmit Options)
The bitfield that configures the transmit options for Transparent mode.
Sets or displays the Zigbee application layer source transmit options. Use this value as the transmit
options for all data transmissions in transparent mode.
XBee/XBee-PRO® S2C Zigbee® RF Module
Addressing commands
222