D1 (Ad1/Dio1/Pti_En Configuration); D2 (Ad2/Dio2 Configuration) - Digi XBee-PRO S2C Zigbee User Manual

AT commands
Default
1

D1 (AD1/DIO1/PTI_En Configuration)

Sets or displays the AD1/DIO1/PTI_En configuration TH pin 19/SMT pin 32.
Parameter range
0 - 6
Parameter Description
0 Unmonitored digital input
SPI_ATTN - Analog input, single ended for the through-hole device
1
2 Analog input, single ended
3 Digital input
4 Digital output, low
5 Digital output, high
Packet trace interface enable. Must be set along with P9= 6 to output traces for OTA
6
sniffing.
Default
0

D2 (AD2/DIO2 Configuration)

Sets or displays the DIO2/AD2 configuration (TH pin 18/SMT pin 31).
Parameter range
0 - 5
0 - 1
Parameter
0
1
2
3
4
5
Default
0
XBee/XBee-PRO® S2C Zigbee® RF Module
Description
Unmonitored digital input
SPI_CLK for through-hole devices
Analog input, single ended
Digital input
Digital output, low
Digital output, high
I/O settings commands
243