Configuring Snmp Trap Managers And Traps - Paradyne 7123 Installation Instructions Manual

Configuring SNMP Trap Managers and Traps

Once the 7123 DSU/CSU is connected to the network, SNMP trap managers and SNMP
traps can be configured.
Procedure
To enter SNMP managers and configure traps:
1. Select SNMP Traps.
Main Menu
SNMP Traps
2. Configure the following:
— Enable SNMP Traps.
— Identify the total Number of Trap Managers.
— Specify the IP address of the NMS(s) to which traps will be sent.
— Specify the Initial Route Destination for the Trap Manager(s).
— Select desired trap categories.
3. Save the configuration.
4. Return to the Main Menu.
Configuration Management and Communication
14