Mode Tables - Halcro SSP100 Owner's Manual

92

Mode tables

The information in these tables assumes the
full speaker setup is used. If some speakers
are missing, the modes may not be available
or some automatic down-mixing may occur.
Mode
Direct
Mono
Stereo
Stereo 96
Dolby Pro Logic
Dolby Pro Logic II
Dolby Pro Logic IIx
Dolby Digital EX
DTS Neo:6
DTS-ES Matrix
THX Cinema
THX Ultra 2 Cinema
Description
No processing is applied, stream is passed unprocessed
Generates mono down-mix from any source
Direct mode for stereo signals or stereo down-mix from multi-channel sources
96/24 mode for analog signal. Tone controls & bass management not available
Processing to create surround sound field from stereo material. Surround channel is
mono (left and right surround channels are identical).
As ProLogic, but with stereo surround channels
•
PLII Movie for two channel movie materials
•
PLII Music for two channel music materials
As for ProLogic II, but with rear channels
Used to process rear channels from Dolby Digital
DTS processing modes to create 6.1/7.1 channel output
•
Neo:6 for DTS 3/2, same as Matrix
•
Neo:6 Cinema for two channel movie materials
•
Neo:6 Music for two channel music materials
Used to process DTS-ES matrix stream. Processing is same as Neo:6
Depends on source input re-equalization for front speakers
Source dependent.
•
Re-equalization for Front speakers
•
Timbre-Match
•
Adaptive Decorrelation
For example, if no center speaker is set up,
center information is automatically directed to
the main speakers and a phantom center
image is created. Also, if rear speakers are not
present in speaker configuration, none of the
enhanced surround (6.1 and 7.1) processing
modes are available.
Free Datasheet http://www.datasheet4u.net/