Halcro SSP100 Owner's Manual page 21

20
22 Composite video Zone and monitor
(without OSD) outputs
The Zone output can be used, for
example, to send a signal to a TV located
in another room. The monitor output
(Mon) is a high quality composite video
output. The On Screen Display (OSD) is
not displayed on the Mon output.
23 S-Video inputs 1 to 6
Accept S-Video
sources. These inputs 1-6 are linked to
analog audio inputs 1-6.
24 S-Video REC output
Connects to the S-video input of a VCR.
25 S-Video monitor output (with OSD)
S-video monitor output, but the OSD is
displayed.
26 S-Video monitor output (without OSD)
Connects to a display with an S-video
input.
27 Optical digital output
Connects to the optical input of your
digital recorder, such as a DAT or a
MiniDisc recorder. The selected digital
source is fed to this output in optical
digital format.
28 Coaxial digital audio inputs 1 to 4
Accept the coaxial digital output from
your source devices. You can freely
associate the digital inputs to any source.
outputs from video
29 Optical digital audio inputs 1 to 2
These connections require optical cables
(Toslink). You can freely associate the
optical inputs to any source (see
Setup
on page 63).
30 AES/EBU balanced digital audio input
This connection requires an XLR cable
and a digital audio source with AES/EBU
connector. You can freely associate the
digital inputs to any source.
31 RS232 control interface
Connects the SSP80/100 to a home
automation system or to a PC for
software updates. Contact your dealer
for details.
32 IR inputs
Used for an additional Infrared remote
controller for Zone B and main viewing
area. Contact your dealer for details.
33 Remote trigger outputs 1 to 3
Connect the DC trigger inputs of any
audio or other device to the trigger
outputs.
(The trigger output may be activated
when the SSP80/100 is switched out of
STANDBY mode, and immediately turned
off again when
switched into STANDBY mode again. You
can also program the trigger outputs to
be activated under other conditions (see
Trigger Setup
on page 79 for further
details).)
Source
the SSP80/100 is
Free Datasheet http://www.datasheet4u.net/