Ssp - Halcro SSP100 Owner's Manual

THX
The THX key activates the THX processing
mode selected in the
11 for information on these features). Press the
THX key to scroll through the available modes
that include:
•
THX
•
THX Surround-EX
•
THX Ultra2 Cinema
•
THX MusicMode
•
THX Games Mode
Note: Available modes depend on the input
signal type and speaker configuration.
Mode
Select the MODE +/- keys to cycle through
the available processing modes (dependent
on the audio signal). The MODE tables (on
page 92) show all available modes for different
signal types (subject to change) and indicate
which speakers are active.
The subwoofer is not included in the table as it
is always active when selected in
Setup
and if any active speakers are set to
'small'. Refer to the mode tables on page 92.
Setup Menu
(see page
Speaker
SSP Page 2
Source
Page 2 of the SSP menu is used for quick
access to the different sources. To change
the selected source,
appropriate key.
Note: Use the UTSR1 menu editing features
to rename the SRC1 to SRC10 keys to have
the same designations
SSP80/100 Source Setup, Titles fields.
SSP Page 3
Up (∧), Down (∨)
During normal use, the UP (∧), DOWN (∨) keys
are used to adjust the volume setting. When
the SETUP mode or SSP menu is active, these
keys are used to navigate the menu, scrolling
up and down respectively.
Left (<), Right (>)
During normal use, the LEFT (<), RIGHT (>)
keys are used to change the selected source.
When the SETUP mode or SSP menu is
active, these keys
adjustments to menu settings.
27
simply select the
given in the
are used to make
Free Datasheet http://www.datasheet4u.net/