Listening To A Cd; Watching A Video - Halcro SSP100 Owner's Manual

Listening to a CD

To listen to a CD:
o Press the Source button (8) on the front
panel of the SSP80/100, and rotate the
volume control (12) to select the source
with the CD player connected to it
(source 7 to 10).
Alternatively, use the UTSR1 and enter the
SSP menu page 2, to select the source
with the CD player connected to it.
o Once the CD player is shown on the
display (4), wait
seconds for the source to be selected.
o Place a CD into the CD player and press
play.
You should hear
speakers. Use the SSP80/100 volume control
(12) on the front panel (or UTSR1) to adjust the
volume.
approximately five
sound through your

Watching a video

To watch a video:
o Press the Source button (8) on the front
panel of the SSP80/100 and rotate the
volume control (12) to select the source
with the VCR connected to it (source 1 to
6).
Alternatively, use the UTSR1 and enter the
SSP menu page 2, to select the source
with the VCR connected to it.
o Once the VCR is shown on the display
(4), wait approximately five seconds for
the source to be selected.
o Insert a tape into the VCR and press play.
You should see a
monitor/projector and hear sound through
your speakers. Use the SSP80/100 volume
control (12) on the front panel (or UTSR1) to
adjust the volume.
Note: The SSP80/100 allows you to enter
information about the size, distance and how
many speakers you have in you system. To
ensure you experience the best quality audio,
refer to the speaker setup information on
page 49.
45
picture on the TV
r
Free Datasheet http://www.datasheet4u.net/