Reverb; Balanced Source - Halcro SSP100 Owner's Manual

60

Reverb

The Reverb-parameter adjusts the level of
reverberation effect of the ambient music
modes (Dry, 1,2,3, Wet). Dry has the least
reverberation and Wet has the most. With this
control it is possible to manipulate the
ambience of the listening area to replicate a
range of listening environments.
AUDIO SETUP
Dolby/DTS setup
Preset setup
Tone controls
LFE level
>
Reverb

Balanced source

Balanced routing
EXIT
To adjust the Reverb setting:
o From the Audio Setup
or DOWN keys to highlight
o Once the setting is highlighted, use the
LEFT or RIGHT keys to adjust the value.
o When satisfied with the value, use the UP
or DOWN keys to highlight the next
setting or EXIT to return to the
Menu
.
0dB
2
Off
DSP
menu, use the UP
Reverb
.
Main
Balanced source
AUDIO SETUP
Dolby/DTS setup
Preset setup
Tone controls
LFE level
Reverb
>
Balanced source
Balanced routing
EXIT
Balanced source assigns the balanced audio
input to any of the ten input sources. When
the balanced source is selected (SRC7) it
replaces the unbalanced analog input from
that source.
To change the balanced source setting:
o From the Audio Setup
or DOWN keys to highlight
source
.
o Use the LEFT or RIGHT keys to change
the setting.
o Once the setting is correct, use the UP or
DOWN keys to highlight the next setting
to be adjusted or highlight EXIT to save
and return to the Main Menu
0dB
2
Off
DSP
menu, use the UP
Balanced
.
Free Datasheet http://www.datasheet4u.net/