Tv System - Halcro SSP100 Owner's Manual

70
Scaler setup
To change the
Display Setup
o From the
UP or DOWN keys to highlight 'Scaler
setup' and press ENT.
st
o To change the 1
or DOWN keys to highlight '1
o Use the LEFT or RIGHT keys to change
the output resolution to your desired
setting.
o Repeat the above
preferences 2 to 4; that is. use the UP
and DOWN keys to highlight 2
then use the LEFT and RIGHT keys to
change the output resolution.
o If you are happy with all the settings, use
the UP or DOWN keys to highlight EXIT
and press ENT to return to the 'Display
setup' menu.
Note: the Scaler Setup allows you to
customize your preference for output video
formats f om the component video and HDMI r
sockets.
The system will use your prefe ences to give
you the best possible output and whe e this
is not available, i will default to your next t
preference.
preferences:
menu, use the
preference, use the UP
st
'.
process for
nd rd th
, 3 , 4
r
r

TV system

There are two options regarding OSD settings
and these can be adjusted in the TV system
setup. Depending on your location, select
either NTSC (National Television Standards
Committee) or PAL (Phase Alternating Line).
DISPLAY SETUP
Scaler Setup
>
TV system
Superimpose
,
Temporary disp.
Video format
Distance units
OSD output
OSD style
EXIT
To change the
o From the
or DOWN keys to highlight
o Use the LEFT or RIGHT keys to change
the setting.
o Once the setting is correct, use the UP or
DOWN keys to highlight the next setting
to be adjusted or highlight EXIT to save
and return to the
Note: If you are not sure wha your country
television standard is, con act your dealer.
NTSC
On
Full
Auto
Feet
Both
Default
TV system
setting for the OSD:
Display Setup
menu, use the UP
TV system
Main Menu
.
t
t
.
Free Datasheet http://www.datasheet4u.net/