Digital Input; Preset - Halcro SSP100 Owner's Manual

Digital input

There are eight digital inputs that can be
assigned to a source: coax 1, coax 2, coax 3,
coax 4, Opt 1, Opt 2, AES/EBU and HDMI.
SOURCE SETUP
Source
Title
>
Digital input

Preset

Analog monitor
Video type
Component bypass On
EXIT
Digital input
To change the
o Make sure the
Source Setup
highlighted in the
Source Setup
o From the
UP or DOWN keys to highlight
input .
o Use the LEFT or RIGHT keys to select the
correct digital input.
o Once the setting is correct, use the UP or
DOWN keys to highlight the next setting
to be adjusted or highlight EXIT to save
Main Menu
and return to the
1
DVD-1
HDMI
No change
HDMI 1
option:
correct source is
menu.
menu, use the
Digital
.
Preset
There are seven 'Preset' options that can be
associated to the selected source. These
options are: No Change, Flat Trims and 1 to 5.
SOURCE SETUP
Source
Title
Digital input
>
Preset
Analog monitor
Video type
Component bypass On
EXIT
•
No change — the values in the Tone
controls or Trims are not changed
•
Flat Trims — if Tone Controls are used,
flat trims will override them by setting
Bass and Treble to zero
Note: If the setting is 'No change', the last
selected 'Preset' setting is s ill active.
If flat settings are wanted, select 'Flat' when
all trims are set to zero and treble and bass
are the default values defined in Audio setup.
65
1
DVD-1
HDMI
No change
HDMI 1
t
Free Datasheet http://www.datasheet4u.net/