Halcro SSP100 Owner's Manual page 83

82
Duration
To adjust the setting:
Trigger Setup
o From the
or DOWN keys to highlight
o Use the LEFT or RIGHT keys to change
the setting.
o Once the setting is correct, use the UP or
DOWN keys to highlight the next setting
to be adjusted or highlight EXIT to save
and return to the Main Menu
Note: 10 ms and 100 ms pulses are also
generated when the
inactive, allowing pulse triggered power
amplifiers to On/Off.
menu, use the UP
Duration .
.
trigger becomes
Free Datasheet http://www.datasheet4u.net/