Halcro SSP100 Owner's Manual page 29

28
Enter (ENT)
During normal use, the ENT key is used to
perform the Input Search
for active input sources (in normal operating
mode).
When the SETUP mode or SSP menu is
active, this key is used to enter menu
selections.
Menu
The menu key accesses the SETUP mode of
the SSP80/100. Use the UP (∧), DOWN (∨),
LEFT (<), RIGHT (>) keys to navigate the menu
and enter (ENT) to select.
To exit the 'Menu' setup without saving
changes, select escape (ESC).
function, to search
Escape (ESC)
When the SETUP mode is active, the ESC key
is used to exit the setup menus without saving
changes. The ESC key can also be used to
cancel special operations, such as auto
calibration or input level monitoring.
Test
The TEST key activates a test signal (for noise
Level Setup
mode calibration in ).
Free Datasheet http://www.datasheet4u.net/