Tone Controls; Low Frequency Effects (Lfe) - Halcro SSP100 Owner's Manual

To adjust Preset settings:
Audio Setup
o From the
or DOWN keys to highlight 'Preset setup'
and press ENT.
o Use the UP or DOWN keys to highlight
the setting you want to adjust.
o Once the setting is highlighted, use the
LEFT or RIGHT keys to adjust the values.
o When satisfied with the values, use the
UP or DOWN keys to highlight EXIT and
press ENT to return to the
menu.
Note: Remember to assign the presets to the
sources with which you want to use them,
from the Source Setup menu.

Tone controls

Tone controls allow additional tuning of the
audio outputs and filter frequencies.
The Bass and Treble adjustment range is from
–12 dB to +12 dB with 1 dB steps.
TONE CONTROLS
>
Treble
B ass
AUDIO SETUP
Tr ble e filter
Dolby/DTS setup
B ass filter
Preset setup
EXIT
Tone controls
>
LFE level
Reverb
Balanced source
Balanced routing
EXIT
menu, use the UP
Audio Setup
0dB
0dB
6kHz
80Hz
0dB
2
Off
DSP
The Tone filters for the Treble filter are 6 kHz,
8 kHz and 10 kHz and for the Bass filter they
are 80 Hz, 110 Hz and 140 Hz.
To adjust Tone controls:
Audio Setup
o From the
or DOWN keys to highlight 'Tone controls'
and press ENT.
o Use the UP or DOWN keys to highlight
the setting you want to adjust.
o Once the setting is highlighted, use the
LEFT or RIGHT keys to adjust the values.
o When satisfied with the values, use the
UP or DOWN keys to highlight EXIT and
press ENT to return to the
menu.

Low frequency effects (LFE)

The LFE channel contains only low frequency
signals and is the '0.1' of the 5.1 or 6.1 channel
digital surround signal. LFE channel is present
only with Dolby Digital, DTS and DTS-ES
channel sources.
To adjust the LFE level:
Audio Setup
o From the
or DOWN keys to highlight
o Once the setting is highlighted, use the
LEFT or RIGHT keys to adjust the value.
o When satisfied with the value, use the UP
or DOWN keys to highlight the next
setting or EXIT to return to the
Menu
.
Note: The adjustment range is from –10 dB to
0 dB with 1 dB steps.
Note: In THX modes, tone controls are
bypassed.
59
menu, use the UP
Audio Setup
menu, use the UP
LFE level
.
Main
Free Datasheet http://www.datasheet4u.net/