Size Setup - Halcro SSP100 Owner's Manual

To set up speaker distances:
o From the 'Speaker Setup' menu, use the
UP or DOWN keys to highlight 'Distance
Setup' and press ENT.
o Use the UP or DOWN keys to highlight
the speaker/channel distance you want
to adjust.
o Use the LEFT or RIGHT keys to adjust the
distance to the correct setting.
o Repeat this process until you are happy
with all distance settings.
o Use the UP or DOWN keys to highlight
EXIT and press ENT to return to the
'Speaker setup' menu.
Note: The adjustment range is from 0ft (0m)
to 63ft (21m).
Note: The maximum
from speakers to the listening position is 15 ft
(5 m). A rounding of '1 ft = 1 ms' and '3ft = 1m'
is used. Refer to 'Display setup', 'Distance
units' to change setup from feet to mete s.
Distance values that are 'Too distant' are
highlighted in a different color (usually red).
The highlighted speaker should be moved
closer or the nearest speaker should be move
further away.
difference in distance
r

Size setup

The 'Size setup' defines
subwoofer settings.
SIZE SETUP
>
Main speakers
Center speaker
Surround speakers Small
Back speakers
Subwoofer
Subwoofer filter
Subwoofer freq.
Enhanced bass
EXIT
•
set speakers that are able to handle full
frequency signals to 'Large' and those
that cannot, to 'Small'
•
if a speaker is not present (such as
Center), set it to 'No'
•
set THX speakers to small 80 Hz
51
speaker and
Large
Small
2Small
Yes
On
80 Hz-THX
Off
Free Datasheet http://www.datasheet4u.net/