Accessing The Ssp80/100 Menus - Halcro SSP100 Owner's Manual

24
Hard keys (H)
•
Standby/On
— activates the system
selected on the UTSR1 home page
If the SSP80/100 is selected, the key will
perform the same
Standby/On button on the front panel (2).
•
Channel ±
— the Ch + and - keys scroll
through the input sources
•
Volume ±
— the Vol + key increases the
volume, and the Vol - key decreases the
volume, in the same way the volume
control (12) operates on the front panel
Accessing the SSP80/100
menus
To access the SSP80/100 menus and make
changes using the UTSR1:
o Activate the UTSR1 and view the Home
page (see page 23) by touching the
"Touch Screen Panel" (F).
o Touch the SSP key on the UTSR1 Home
page to view the SSP page 1 (the
leftmost screen shown to the right).
o Press the down arrow key (to the right of
the page number) to scroll through the
SSP pages until you reach page 3 (shown
on the far right).
o Access the SSP80/100
touching the MENU key.
The SSP80/100
Main Menu
displayed. (The
menus are shown on page 47, and
described in the
page 47.)
function as the
Main Menu by
Main Menu (setup) is
and setup
sections following
When you select the SSP80/100
the processor enters SETUP mode.
(Refer to the next sections for descriptions of
these SSP pages.)
Main Menu
,
Free Datasheet http://www.datasheet4u.net/