Audio Setup; Audio Setup; Dolby/Dts Setup; Preset Setup - Halcro SSP100 Owner's Manual

Audio Setup

The Audio Setup includes Dolby/DTS, Bass
limiter, Tone, Preset, LFE, Reverberation and
Balanced Input settings and affects all source
input channels.
MAIN MENU
Speaker setup
>

Audio setup

Source setup
AUDIO SETUP
Display setup
>

Dolby/DTS setup

Trigg er etup s

Preset setup

THX Audio setup
Tone controls
EXIT
LFE level

Reverb

Balanced source
Balanced routing
EXIT
To select Audio setup:
Main Menu
o Enter the
o Use the UP or DOWN keys until
Setup
is highlighted.
o Press ENT to select.
0dB
2
Off
DSP
.
Audio

Dolby/DTS setup

Setup parameters are as follows:
•
PL II panorama – On/Off
Extends the front stereo image to include
surround speakers.
When panorama is 'On', the music signals
from the front channels are spread to
surround channels
wraparound effect.
•
PLII width – Min, 1 to 6, Max
Controls the width of the front sound field
in PLII Music mode.
Sound from the
distributed to the front Left and Right
channel speakers to create a smooth
blend of sound across the front.
•
PLII dimension – -3 to 3
Allows the user to adjust the soundstage
either to the front or to the rear varying
the spatial effect.
The dimension ± range controls the front-
surround balance of the sound field in PLII
Music Mode. When set at 0 the control
has no effect. When set + the surround
field moves to the front and when - the
field moves to the rear.
57
to create a
Center channel is
Free Datasheet http://www.datasheet4u.net/