68
Scaler bypass (SSP100 only)
The scaler bypass parameter feeds the HDMI
and component video input straight through
to the HDMI and component video output
sockets
(On)
or
routes
component video inputs through to the video
DSP (Off).
There is no video DSP in the SSP80
SOURCE SETUP
Source
Title
Digital input
Preset
Analog monitor
Video type
>
Scaler bypass
EXIT
the
HDMI
and
1
SRC 1
HDMI
No change
HDMI1
On
Scaler bypass
To change the
o From the
Source Setup
Scaler bypass
.
o Use the LEFT or RIGHT keys to change
the setting.
o Once the setting is correct, use the UP or
DOWN keys to highlight the next setting
to be adjusted or highlight EXIT to save
Main Menu
and return to the
setting:
menu, use the
.
Free Datasheet http://www.datasheet4u.net/