Factory Default Settings - Halcro SSP100 Owner's Manual

Factory default settings

The SSP80/100 has been programmed at the
factory with default settings to simplify the
initial setup procedure. If possible, connect
your source components to match the below
settings.
Source 1 (DVD player with HDMI)
•
HDMI — input 1 (37)
•
S-Video — input 1 (23)
•
Composite Video — input 1 (20)
•
Analog Audio — input 1 (39)
Source 2 (Set-top box with HDMI)
•
HDMI — input 2 (37)
•
S-Video — input 2 (23)
•
Composite Video — Input 2 (20)
•
Analog Audio — input 2 (39)
Source 3 (Media Server with HDMI)
•
HDMI — input 3 (37)
•
S-Video — input 3 (23)
•
Composite Video — input 3 (20)
•
Analog Audio — 'Setup' menu input 3
(39)
Source 4 (DVD player with component video)
•
Component Video — input 1 (34)
•
S-Video — input 4 (23)
•
Composite Video — input 4 (20)
•
Analog Audio — input 4 (39)
•
Digital Audio Coaxial — coax 1 (28)
Source 5 (VCR)
•
Component Video — input 2 (34)
•
S-Video — input 5 (23)
•
Composite Video — input 5 (20)
•
Analog Audio — input 5 (39)
•
Digital Audio Coaxial — coax 2 (28)
Source 6 (Cable TV with component video)
•
Component Video — input 3 (34)
•
S-Video — input 6 (23)
•
Composite Video — input 6 (20)
•
Analog Audio — input 6 (39)
•
Digital Audio Optical — optical 1 (29)
Source 7 (CD or SACD with balanced audio)
•
Analog Audio — input 7 (39)
•
Balanced Analog Audio (18)
Source 8 (CD player with digital)
•
Analog Audio — input 8 (39)
•
Digital Audio Coaxial — coax 3 (28)
Source 9 (Tuner)
•
Analog Audio — input 9 (39)
•
Digital Audio Coaxial — coax 4 (28)
Source 10 (Music Server)
•
Analog Audio — input 10 (39)
•
Digital Audio Optical — optical 2 (28)
Note: Default settings can be changed in the
Source setup menu For details refer to .
Source Setup chapter on page 63.
33
Free Datasheet http://www.datasheet4u.net/