Ssp Setup And Operation; Starting Up; On Screen Display (Osd) - Halcro SSP100 Owner's Manual

SSP Setup and Operation

After completing the connection setup as
outlined in the Quick Start Guide (page 29),
reconnect the power to all components and
turn them on.
To access the setup menus during the source
setup procedure, you can use either the
Universal Touch Screen Remote (UTSR1)
supplied with the SSP80/100, or the front
panel controls (see page 41). If using the
UTSR1 for setup (recommended), you will
need to charge the remote overnight before
use and read the UTSR1 Owner's Manual for
operation details.
Note: Four AAA batteries may be used
ins ead t of the supplied
batteries. Remember to use the supplied
r echargeable AAA batteries only if using the
Docking Station for charging.

Starting up

To turn on the SSP80/100:
o Connect the mains power cable from a
power outlet to the unit (46), and switch
the power on.
o Wait for the Standby LED to appear (3)
and then press the Standby/On button
(2) on the front panel of the SSP80/100
(or UTSR1) to turn the unit on.
(A start-up message will appear on the
OSD (4)).
Before you are able to watch a DVD or listen
to any music, you will need to access the
Main Menu
SSP80/100
parameters for each source component.
rechargeable
to specify the source

On screen display (OSD)

Begin the setup procedure by displaying the
menu on your TV monitor/projector, as
follows:
o Turn the remote on by touching its LCD
screen.
o Select SSP from the options.
o Use the up/down arrows to scroll to
page 3 of the SSP menu.
o Press the MENU key on page 3.
Main Menu
The SSP80/100
with 'Speaker Setup' as the first option in
a list.
o Scroll through the list using the down
arrow until 'Display Setup' is highlighted.
o Select 'ENT' to enter the
Menu
.
o Scroll through the list using the down
arrow until 'TV system' is highlighted.
o Use the LEFT (<) RIGHT (>) keys to select
either NTSC or PAL to suit your TV
system (NTSC is used in the USA; PAL is
used in most other countries).
o Once selected, use the UP (∧) DOWN (∨)
keys to highlight EXIT and press ENT to
Main Menu
return to the
o Exit again to save changes.
43
is displayed,
Display Setup
.
Free Datasheet http://www.datasheet4u.net/