Installation
Ensure you have read the
Information
on page 5 before installing your
Halcro Logic SSP80/100.
If you require assistance in the unpacking and
installation of your Halcro SSP80/100, please
contact your dealer.
Unpacking
Unpack the unit carefully, noting that all
components are present and undamaged.
Your carton should contain the following
items:
•
SSP80 or SSP100, as ordered
•
mains supply cable (USA and EU)
•
three feet (for stacking)
•
calibration microphone
•
Universal Touch Screen Remote (UTSR1)
with 120 V charger
•
docking station
•
230 V charger (EU)
•
Owner's Manual
•
Warranty Card
Important Safety
Storing packaging
The packaging is custom-designed to prevent
damage from occurring during transport.
Store the packaging in a dry location.
Positioning
We suggest the Halcro Logic SSP80/100 be
positioned on a stable, flat surface. The airflow
to the vents should not be interrupted. Ensure
there is at least four inches (ten centimeters)
clearance around the vents.
Do not install in a location exposed to direct
sunlight or strong artificial light.
Do not install in a location exposed to high
humidity, or where ventilation is poor.
Ensure
the
mains
accessible.
Do not connect to mains power
until all the connections are
made and checked.
15
plug
remains
easily
Free Datasheet http://www.datasheet4u.net/