Preset Setup - Halcro SSP100 Owner's Manual

58
•
Neo:6 Cente Image – Min, 1 to 4, Max r
Controls the width of the front sound field
in Neo:6 Music mode.
Sound from the
distributed to the front Left and Right
channel speakers to create a smooth
blend of sound across the front.
DOLBY/DTS SETUP
>
PL II panorama
PL II width
PL II dimension
Neo6 center image 2
EXIT
To set up Dolby/DTS:
o From the Audio Setup
or DOWN keys to highlight
Se
tup and press ENT (Enter).
o Use the UP or DOWN keys to highlight
the setting you want to adjust
o Once the setting is highlighted, use the
LEFT or RIGHT keys to adjust the values
o When satisfied with the values, use the
UP or DOWN keys to highlight EXIT and
press ENT to return to the
menu.
Center channel is
Off
3
0
menu, use the UP
Dolby/DTS
Audio Setup

Preset setup

The Preset setup allows compensation for
possible variations in the audio outputs from
different sources.
The Treble and Bass settings replace the
Treble and Bass in the Tone setup for any
source that has a preset selected.
Center, Surround and Subwoofer settings are
added to the values in Level setup, where
levels can be increased or decreased by
±12 dB.
The Lipsync feature controls the system wide
audio delay to ensure the audio and video are
in sync. With this adjustment you can re-sync
audio and video signals, where the range is
0-150 ms at up to 48 kHz sample rate signals
and up to 70 ms at up to 96 kHz signals.
PRESET SETUP
>
Preset
T reble
PRESET SETUP
B s a s
>
Preset ----- + -----
Center
Treble ----- + -----
S r ur ound
Bass ----- + -----
S ubwoofer
Center ----- + -----
L ipsync
Surround ----- + -----
E IT X
Subw ----- + -----
Lipsync
EXIT
1
0dB
0dB
1
0dB
0dB
0dB
0dB
0dB
0dB
O ff
0dB
0dB
130ms
Free Datasheet http://www.datasheet4u.net/