Watching A Dvd - Halcro SSP100 Owner's Manual

44

Watching a DVD

To watch a DVD:
o Press the Source button (8) on the front
panel of the SSP80/100, and rotate the
volume control (12) to select the source
with the DVD player connected to it
(source 1 to 6).
Alternatively, use the UTSR1 and enter the
SSP menu page 2, to select the source
with the DVD player connected to it.
o Once the DVD player is shown on the
display (4), wait
seconds for the source to be selected.
o Place a DVD into the DVD player and
press play.
You should see a
monitor/projector and hear sound through
your speakers. Use the SSP80/100 volume
control (12) on the front panel (or UTSR1) to
adjust the volume.
approximately five
picture on the TV
Dialog normalization
Dialog normalization (Dial Norm) is a feature of
Dolby Digital, which is used to keep the
programs at the same average listening level
so the user does not have to change the
volume control between
programs.
When playing back media encoded in Dolby
Digital, you may sometimes see a brief
message in the front panel display reading
"Dial Norm X dB" (X being a numeric value).
The display is showing how the program level
relates with THX calibration level. If you want to
play the program at calibrated theatrical levels,
you may wish to adjust the volume.
For example, if you
message: "Dial Norm + 4 dB" in the front panel
display, to keep the overall output level at THX
calibrated loudness,
volume control by 4 dB. However, unlike a
cinema, where the playback loudness is
preset, you can choose
volume setting for best enjoyment.
Dolby Digital
see the following
just turn down the
your preferred
Free Datasheet http://www.datasheet4u.net/