Rear Panel - Halcro SSP100 Owner's Manual

12 Volume con rol t
Controls the volume of the audio output
and can also be used to manually select
menu options, audio/video sources and
mode control.
13 Headphone audio output 1
Stereo output with volume control for the
selected source input.
14 Headphone audio output 2
Stereo output with volume control for the
selected source input.
15 Mic ophone input socket r
Used for auto-calibration of speaker level
and distance. See page 55.
16 RS232 control interface
Used for connecting the SSP80/100 to a
computer or home automation system
17 USB control interface
Used for connecting the SSP80/100 to a
computer or home automation system.

Rear panel

18 7.1 balanced audio
Accepts balanced
stereo inputs from analog audio sources
(SACD or DVD audio player).
18a Stereo balanced audio input (SSP80)
Accepts inputs from balanced audio
outputs of an analog audio source.
input (SSP100)
multi-channel and
19 7.1 balanced audio outputs
Connect to the balanced LINE inputs of
power audio amplifiers. These outputs
feed the same signal as the 7.1 channel
outputs, except that bypassed balanced
audio input can only be heard from these
outputs.
20 Composite video inputs 1 to 6
Accept composite video outputs from
video sources. These inputs 1-6 are
linked to analog audio inputs 1-6.
The received composite video signal is
fed out from the composite video record
(REC), monitor (MON) output, Monitor
with On Screen Display information (Mon
OSD) and Zone output.
21 Composite video record (REC) and
monitor (MON) (with OSD) outputs
Connect the composite REC output to
the composite
recording device such as a VCR.
(Connect the Mon OSD to a display
device with a composite input (TV). The
video signal with the On Screen Display
will be shown.
You can also use the composite video
Mon OSD output even if no composite
video source is connected. The selected
S-Video signal is down-mixed to this
output and you can use it for monitoring.)
19
video input of your
Free Datasheet http://www.datasheet4u.net/