Important Safety Information; Symbols; Electrical Safety - Halcro SSP100 Owner's Manual

Important Safety Information

Symbols

The following symbols are used on this
equipment:
The lightning
arrowhead symbol, within an
equilateral triangle, is intended to
alert the user to the presence of
uninsulated 'hazardous voltage'
that may
magnitude to constitute a risk of
electric shock to a person if
exposed or contacted.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important
maintenance
instructions
pages.
The 'CE'
compliance of this device with
the relevant directives of the
European community including
the EMC
Compatibility)
Voltage Directive) standards.
Warning of electrical shock
hazard. Do not open cover
(or back). There are no
user
inside.
Refer servicing to qualified
service personnel.
flash with
be of sufficient
operating and
(servicing)
in the following
symbol indicates
(Electromagnetic
and LVD (Low
serviceable parts

Electrical safety

WARNING: This product must
always be connected to a
mains socket outlet with a
protective earth connection.
Only use a suitable approved mains cord
complying with European individual country
requirements in the CE Low Voltage Directive
Scheme.
WARNING:
button does not disconnect the
unit from the mains power.
To disconnect the unit from the
mains, switch off the unit at the
mains socket
withdraw the mains plug from
the socket outlet.
5
DANGER: Do no t
open the cover o r
back, or remove any
panels, or try to
modify or repair the
SSP80/100. Opening
the SSP80/100 may
expose you to
dangerous voltages
and will void the
warranty.
The Standby/On
outlet and
Free Datasheet http://www.datasheet4u.net/