Control Assign Dialog - Yamaha MODX6 Supplementary Manual

Control Assign dialog

In the dialog displayed when the Part parameter is selected and the [CONTROL ASSIGN] button is pressed, while pressing
[PART SELECT MUTE/SOLO], operating the Assignable Knob selects the Assignable Knob of Common.
Point the cursor to the control destination parameter of the Part  Press the [CONTROL ASSIGN] button.
Operation
While pressing the [PART SELECT MUTE/SOLO] button, operate the Knob you wish to use when operating the target parameter.
NOTE An error message appears when you turn the Super Knob and there are no more Assignable Knobs or Control Assigns available for
assigning a Source.
MODX Supplementary Manual
6