4: Rename File - Yamaha VL1 Owner's Manual

Feature Reference

4: Rename File

This function can be used to rename a specified data file on a floppy disk inserted
in the VL1 floppy disk drive. Five types of data files can be selected.
All
System
All Voice
1 Bank
1 Voice
File Rename Procedure
1.
Insert the Floppy Disk
Make sure the floppy disk containing the file you want ot rename is properly
inserted in the VL1 floppy disk drive.
• Also make sure that the floppy disk's write protect tab is set to the "off" or
"write enable" position.
2.
Select a File Type and press [
Position the cursor at the type of file you want to rename, then press the [
button.
3.
Select a File and Press ∞
When the file window appears, select the file you want to rename and press the ∞
button ("Rnam").
4.
Enter a File Name
Enter a new name (maximum 8 characters) for the selected file (≥
• File names which begin with or contain a space are not allowed.
5.
Press ] or [
Press the ] or [ button to close the name window.
Utility Mode
All system and voice data.
All Utility System page settings and internal Microtuning data.
All 128 voices in the the VL1 memory.
16 voices from 1 VL1 memory bank (A ... H).
1 voice.
168
Page 31).