7: Rename/Delete - Yamaha SY85 Owner's Manual

[UTILITY] → [DISK] → [MENU] → 7:Rename, Delete → [ENTER/YES]
These utilities allow disk files to be renamed or deleted.
DISK`Rename/Del<````````>```Type````````
[REN]`DEL````````Disk=01````1:All,Sy,Seq

7: RENAME/DELETE

F1 F2 F3
CS1 CS2 CS3
Press the [F1] key to highlight "REN" on the display if you want to rename
a file, or press the [F2] key to highlight "DEL" on the display if you want to
delete a file. Next, use [CS6] to select the type of data file you want to rename
or delete ("1:All,Sy,Seq" for all synthesizer and sequencer files, "NSEQ" for
NSEQ format files, "Other" for standard MIDI format files, and "MDR" for
MDR files). Use [CS5] to select the number of the disk file (01 through 99)
that you want to load from or save to. Only files that have the selected file
type will show a file name above the file number.
If you selected "REN", enter the file name with the group and program
keys as in "Voice Name" (see page 95), then press [ENTER/YES] to begin the
rename procedure. If you selected "DEL", simply press [ENTER/YES] to begin
the delete procedure. The following confirmation display will appear:
DISK`Rename/Del<````````>`Are`you`sure`?
`REN`[DEL]```````Disk=01````1:All,Sy,Seq
Press [ENTER/YES] again to confirm that you want to go ahead with the
file rename or delete operation, or press [EXIT/NO] to cancel.
When the file has been renamed or deleted, "Completed!" will appear
briefly on the display.
See page 321 for information on disk error messages.
F4 F5 F6
CS4 CS5 CS6
F7 F8
CS7 CS8
DISK
UTILITY MODE /
231