Repairs
Repairs
Replacing a UniTrack rail
UniTrack rails are available in five different
lengths that are used depending on the seat
depth selected.
Removal
1. Remove the two screws that hold the rail in
place. See the illustration.
Mounting
1. Mount the UniTrack rail using two screws.
See the illustration. Use a torque wrench to
tighten the screws.
Tightening torque 9.8 Nm.
For this task the following tools are necessary:
1 Allen key 5 mm
The UniTrack rail is held in place by two screws.
56
Replacing a UniTrack rail