Replacing The Backrest Plates - Permobil M300 Corpus HD Service Manual

Repairs
Replacing backrest plates
Backrest plates are available in three different
widths to fit most users. If you change the size of
the backrest plates you will also have to change
the cushion to one that is a suitable size. See the
table on 87.
Removal
1. Remove the backrest cushion by pulling it
straight forwards. It is attached by means of
Velcro on the rear of the cushion.
2. Remove the upper section of the back rest by
carefully pulling it straight up. See fig.
3. Remove the knob securing the position of the
lower backrest plate. See the illustration.
4. Remove the lower section of the back rest by
pulling the backrest plate straight up so it can
be removed from the four locking devices.
See the illustration.
Removal/Fitting of the upper
section of the back rest.
The lower backrest plate is secured
by means of a knob
The lower backrest plate is secured by
means of four locking devices
58
Replacing backrest plates