This is how you remove and install the headrest.
1.
Loosen the handle
at the rear of the backrest.
2. Lift the headrest straight up
Install in the reverse order. You can remove and install the headrest without
affecting current settings.
4.11.3
Backrest tilt
You can adjust the backrest to several fixed positions. From an upright
position, the backrest can be tilted a maximum of 45°.
Do not put any weight on the backrest while you adjust it.
1.
Hold the backrest and pull out the handle
that the locking tube moves freely.
2. Adjust the backrest angle to the preferred position.
3. Release the handle
to lock the locking tube.
4. Make sure that the backrest is locked in position.
44 - Wheelchair usage
.
of the quick-acting lock so