Table of Contents
Advertisement
5.1.1. Operating instructions
Before any intervention, respect the health and safety instructions
IMPORTANT : The ram (1) must be installed on a horizontal, stable and level surface (e.g. concrete slab). It
must be secured to the floor by suitable fastening devices to ensure stability during use.
• Step 1:
Place the cover (6) in front of the plate and the
counterplate of the ram (1).
Tighten the 2 washers (1.1) and the 2 screws (1.2) on the
cover (6) by means of a 8 mm flat wrench.
• Step 2:
Connect the air supply to the ram (1) to the compressed air
network (maximum 6 bar / 87 psi).
Member of Exel group
6
6
24
see § 1 page
6.
1
1
2
1.2
1.1
0-6 bar / 0-87 psi
DRT582350110
A - 2023/10
Advertisement
Table of Contents
