Table of Contents
Advertisement
• Step 16:
Place the lower propeller (7.1.3) on the agitator rod (7.1.2).
Tighten the screw (E) by means of a 8 mm flat wrench.
Tightening torque: 17 N.m. / 12.5 Ft.Lbs
IMPORTANT :
The mounting direction of the lower
propeller differs from that of the upper propeller.
IMPORTANT : The agitator supports (8.3.1 & 8.3.2) must
be between the 2 propellers.
• Step 17:
Locate a drum (F) under the agitation unit.
IMPORTANT : Center the drum (F) in relation to the cover
to avoid any risk of friction and sparks, especially from the
propellers.
Member of Exel group
1
7.1.3
F
31
7.1.2
E
2
DRT582350110
A - 2023/10
Advertisement
Table of Contents
