SAMES KREMLIN Cyclix 200 L Instruction Manual page 72

• Step 6:
Untighten the 4 screws (8.3.2.3), the 8 washers (8.3.2.4 &
8.3.2.5) and the 4 nuts (8.3.2.6) from the support (8.3.2) by
means of a 10 mm flat wrench and of a n°5 hex key.
• Step 7:
Remove the ring (8.3.2.2) from the agitator rod (7.1.2).
Member of Exel group
8.3.2.3
8.3.2.1
7.1.2
7.1.2
72
8.3.2.5
8.3.2.6
8.3.2.4
8.3.2.1
8.2
8.3.2.2
DRT582350110
A - 2023/10