SAMES KREMLIN Cyclix 200 L Instruction Manual page 82

• Step 13:
Place the upper propeller (7.1.3) on the agitator rod (7.1.2).
Tighten the screw (E) by means of a 8 mm flat wrench.
Tightening torque: 17 N.m. / 12.5 Ft.Lbs
IMPORTANT : The mounting direction of the lower
propeller differs from that of the upper propeller.
IMPORTANT : The agitator supports (8.3.1 & 8.3.2) must
be between the 2 propellers.
• Step 14:
Connect the ram (1) air supply hose to the compressed air
network.
Member of Exel group
1
7.1.3
82
7.1.2
E
2
DRT582350110
A - 2023/10