SAMES KREMLIN Cyclix 200 L Instruction Manual page 76

• Step 13:
Untighten the 4 screws (7.1.1.4) and the 8 washers
(7.1.1.5 & 7.1.1.6) located under the cover (6) by means of
a 13 mm flat wrench.
Remove the geared motor (7.1.1.1) of the agitator (7)
from the cover (6).
IMPORTANT : If the maintenance of the piston-motor kit
(ind. 7.1.1.8) is required, go to step 14.
Otherwise, go directly to procedure C2.
IMPORTANT : It is not necessary to disassemble the motor
(7.1.1.1) if you only wish to service the propellers (7.1.3).
• Step 14:
For maintenance of the piston-motor kit (ind. 7.1.1.8),
§ 8.1.2.1 page 105, please refer to the supplier's manual
supplied with your kit.
Member of Exel group
7.1.1.6
7.1.1.5
7.1.1.4
7.1.1.1
6
see
76
1
2
7.1.1.8
DRT582350110
A - 2023/10