SAMES KREMLIN Cyclix 200 L Instruction Manual page 73

• Step 8:
Untighten the 4 screws (8.3.1.3), the 8 washers (8.3.1.4 &
8.3.1.5) and the 4 nuts (8.3.1.6) from the support (8.3.1) by
means of a 10 mm flat wrench and of a n°5 hex key.
• Step 9:
Remove the ring (8.3.1.2) from the agitator rod (7.1.2).
Member of Exel group
8.3.1.5
8.3.1.4
8.3.1.1
8.3.1.6
73
8.3.1.1
8.1
7.1.2
7.1.2
8.3.1.2
DRT582350110
A - 2023/10
8.3.1.3