Inobooth; Health And Safety Instructions; Marking - SAMES KREMLIN Inobooth User Manual

1. Health and safety instructions

This manual contains links to the following instructions manuals:
• see RT Nr 7142
• see RT Nr 7141
•
see RT Nr 7140
•
see RT Nr 7167
•
see RT Nr 6457
•
see RT Nr 7133

1.1. Marking

The Inobooth is intended for use in non-explosive atmosphere.
To comply with the EN 16985 standard, the marking plate located on the base of the booth
(bottom right) must be completed by the integrator in accordance with the instructions below:
• Référence : note either the drawing number, the customer's name or the project number.
• Type de cabine : note either Manual Powder Booth, or Automatic Powder Booth, or
Manual and Automatic Powder Booth.
• Puissance électrique installée : (kW).
• Débit ventilation minimal requis à 20°C : (m3/h) This is the minimum ventilation flow rate to
respect the minimum air speeds at the openings and also the powder concentration in
the booth. (Note the lower value of the two).
• Apport maximal de poudre de revêtement : (g/h) This is the amount of powder sprayed
into the booth to meet the acceptable powder concentration.
• LIE : (g/m3) Values transmitted by the powder manufacturer. Note 20 g/m3 if no informa-
tion is available.
Index revision : A
for the Inocenter powder station.
for the Inoprofile self-positioning assembly.
for the Inorecip V reciprocator.
for the Inorecip H in and out positioner.
for the Inomaster Platinum control cabinet.
for the Inogun A projector.

INOBOOTH

INOBOOTH
5 7143