SAMES KREMLIN Cyclix 200 L Instruction Manual page 59

6.4.2.2. Procedure B2: Re-assembly of the cover (1)
• Step 1:
Tighten the 4 nuts (6.5), the 4 washers (6.4) and the 4
screws (6.3) by means of a 10 mm flat wrench and a n°5
hex key to install the handles (6.2) on the cover (6.1).
• Step 2:
Place the cover (6) in front of the plate and the
counterplate of the ram (1).
Tighten the 2 washers (1.1) and the 2 screws (1.2) on the
cover (6) by means of a 8 mm flat wrench.
Member of Exel group
6.3
6.2
6.4
6.5
6
6
59
6.1
1
1
2
1.1 1.2
DRT582350110
A - 2023/10