SAMES KREMLIN Cyclix 200 L Instruction Manual page 30

• Step 14:
Install the ring (8.3.2.2) on the agitator rod (7.1.2).
• Step 15:
Place the agitator axis supports (8.3.2.1) on the agitator
rod (7.1.2) as well as the tube (8.2).
Tighten the 4 screws (8.3.2.3), the 8 washers (8.3.2.4 &
8.3.2.5) and the 4 nuts (8.3.2.6) by means of a 10 mm flat
wrench and of a n°5 hex key.
Member of Exel group
7.1.2
8.3.2.3
8.3.2.1
7.1.2
30
8.3.2.2
8.3.2.5
8.3.2.6
8.3.2.4
8.3.2.1
8.2
DRT582350110
A - 2023/10